Why Multi-cylinder Hydraulic Cone Crusher is More and More Popular?

Why Multi-cylinder Hydraulic Cone Crusher is More and More Popular?

1. Energy-efficient and highly effective, with significant cost reduction

Adopting the principle of lamination crushing and the design of a hyperbolic cavity, combined with the optimization of motion parameters, it realizes the directional extrusion and crushing of materials. Compared with traditional equipment, the energy consumption is reduced by 22%-25%, the unit production capacity is increased by more than 35%, the crushing cost per ton is saved by more than 18%, and the power and operation and maintenance expenses of enterprises are significantly reduced.

2. Intelligent hydraulic system for precise control

Equipped with a hydraulic system from Rexroth in Germany, it supports real-time dynamic adjustment of the discharge opening at the ±5mm level, and the qualified rate of finished products is increased to more than 92%. It is equipped with a multi-stage pressure sensing device. When encountering unbreakable foreign objects, it automatically unloads the load within 0.3 seconds. The response speed of equipment protection is 40% faster than the industry standard, and the annual fault shutdown time is reduced to less than 8 hours.

3. Military-grade wear resistance for long-term operation

The moving cone/fixed cone adopts the composite casting process of molybdenum-vanadium alloy, and the surface hardness reaches HRC63-65. Combined with the gradient heat treatment technology, the impact fatigue life of the core components exceeds 12,000 hours. It is equipped with a three-dimensional laser calibration system to ensure a precise fit between the eccentric sleeve and the main shaft at the 0.02mm level, and continuously maintain the crushing performance at the time of factory shipment.

4. Green intelligent manufacturing with dual effects

Innovatively adopting the design of a fully enclosed shock-absorbing cavity, the operating noise is reduced to below 75dB(A), which is 8.3% lower than the national standard. It integrates a pulse reverse blowing dust removal module, and the dust collection efficiency is ≥99.2%, and the emission concentration is <10mg/m³. It simultaneously meets the ISO14001 environmental protection certification and CE safety standards, helping enterprises achieve clean and efficient production.